Installation Manuals
caveat
If the lamps do not light-up, please unplug the power line, Switch the positive and negative terminals of the terminal block，connect it
According to most vehicles' configurations, we recommend keeping the LED chips facing the 3o' clock and 9o' clock positions to ensure the best beam pattern and visual effect. However, it is impossible to adjust to this position for some vehicles. There is no need to worry about the position of the LED chips as long as the beam pattern is acceptable. LED chips facing 3o’ clock and 9o’ clock positions
General Installation of GuardBeam Automotive Light Bulbs
1: Remove the dust cover and the OE Halogen bulb.Hold the base of the lamps and turn counter-clockwise until it is unlocked,and then remove the OE Halogen bulb;
2: Insert the retainer holder into the assembly slot, match the tabs with slot, and lock the retainer holder with the buckle;
3: Insert the lamps into the retainer holder with correct position ;Note:H4 rotate clockwise until the LED chips face 3-9o' clock.
4: Rotate the base of the lamps clockwise until it is in the correct position;
5: Please double check the“+/-”polarity before connecting the plug.(If the lamps do not light-up, please unplug the power line, Switch the positive and negative terminals of the terminal block，connect it).
6: Sort and fix the wiring harness with Zip Ties.